Product Description
CyberVis™ RM rheology modifier is an organic polymeric material comprised of very high molecular weight organic acids. This material is an effective rheology modifier for the CyberDrill® synthetic-based drilling fluid system.
Benefits
CyberVis RM polymer is specifically engineered and field proven to provide increased low-end rheology and yield point.
Application
The primary application for CyberVis RM rheology modifier is in the preparation of new drilling fluids at the liquid mud plant where shear rates and mixing times are insufficient to fully stabilize the emulsion. The additive’s effectiveness will diminish as bottomhole temperatures increase from 350°F (177°C) to 425°F (218°C).
Treatment Recommendation
Treatment levels are best determined by pilot testing, but generally will be less than 4 lb/bbl (0.55 gal/bbl). Over-treatment should be avoided in freshly mixed drilling fluids as the organophilic clays will fully yield and the emulsion will tighten after a circulation through the bit.
Typical Physical Properties
| Appearance: | Dark amber liquid |
| Flash Point: | 280°F (138°C) |
| Specific Gravity: | 0.87 (7.26 lb/gal) |
Handling and Storage
Avoid contact, inhalation and ingestion. Store in a cool, dry, well-ventilated area away from ignition sources and strong oxidizing agents. Keep container tightly closed. Use appropriate hygiene, clothing and personal protective equipment suitable for work being done. Review the SDS thoroughly before using this product.
Packaging
CyberVis RM rheology modifier is available in 5-gallon (19-liter) pails and 55-gallon (208-liter) drums.
