Product Description

NewCarb™ lost circulation material (LCM) is ground limestone available in fine, medium and coarse grades over a wide particle size range. NewCarb is ground to exacting specifications and is acid soluble, making it ideal for use in production zones.

Contact Us About NewCarb™ (F,M,C)

Benefits

The versatile NewCarb LCM is ideally suited to remediate seepage losses in production sands.

Application

NewCarb LCM is used primarily as a bridging agent in sand formations where seepage losses are a primary concern. It may also be used as a weighting agent in fluid densities up to 12 lb/gal (1.4 sg). For seepage losses in sands, use a NewCarb and DynaFiber™ LCM blend.

Treatment Recommendation

If seepage losses are detected, NewCarb and DynaFiber LCM’s are recommended in a 2:1 ratio in premixed 25-30 bbl sweeps. If losses persist, maintain NewCarb concentration at 5-10 lb/bbl and DynaFiber concentration at 3-5 lb/bbl in the active system. This combination will provide a wide particle size range and act as a bridging agent under dynamic conditions.

NOTE: The most important aspect of combating lost circulation is particle size distribution. Consequently, it is recommended that a combination of materials be added to ensure a good particle size distribution (PSD).

PARTICLE SIZE DISTRIBUTION

FineMediumCoarse
Retained on 60 Mesh0%0%5%
Retained on 100 Mesh0%1%10%
Retained on 200 Mesh1%6%15%
Retained on 325 Mesh3%9%10%
Passing 325 Mesh96%84%60%

Typical Physical Properties

Appearance:Tan powder
Acid Solubility:98.5%
Moisture:0.1%
Specific Gravity:2.60-2.75

Handling and Storage

Avoid breathing dust. Use appropriate hygiene, clothing and personal protective equipment suitable for work being done. Review the SDS thoroughly before using this product.

 

Packaging

NewCarb LCM is available in 50-pound (22.7-kilogram) multi-walled bags and bulk quantities.

Download Product PDF