Contact Us About DynaNite™

Product Description

DynaNite™ filtration control agent is a naturally occurring asphaltite-type mineral used for reducing HPHT filtrate values in oil- and water-based drilling fluids. The product disperses readily in any oil- and water-based drilling fluids supplemented with a wetting agent such as EvoCon® fluid conditioner.

Benefit Benefit

DynaNite filtration control agent aids the prevention of stuck pipes in reactive formations.

Application Application

While equally beneficial in oil- and water-based drilling fluids, DynaNite filtration control agent is especially effective as a shale stabilizer and filter cake conditioner in aqueous drilling fluids. In addition, it is particularly applicable for drilling low-pressured or depleted sands.

Treatment Recommendation Treatment Recommendation

An initial treatment of 2-6 lb/bbl is recommended. When mixed in a water-based drilling fluid, EvoCon fluid conditioner can be added to preferentially water-wet the DynaNite filtration control agent. The incorporation of EvoCon additive minimizes the tendency of the mineral to agglomerate and be removed by fine shaker screens.

Typical Physical Properties Typical Physical Properties

Appearance: Dark brown to black powder
Flash Point (COC): 600°F (316°C)
Melting Point: 340°F (171°C)
Specific Gravity: 1.04-1.06

Handling and Storage Handling and Storage

Minimize exposure to dust. Store in a cool, dry area away from ignition sources and strong oxidizing agents. Use appropriate hygiene, clothing and personal protective equipment suitable for work being done. Review the SDS thoroughly before using this product.

Packaging Packaging

DynaNite filtration control agent is available in 50-pound (22.7-kilogram) multi-walled bags.

Download Product PDF