DynaLose™ W filtration control agent is a premium-quality, white, pre-gelatinized cornstarch used in all types of water-based drilling fluids. It is particularly effective in high hardness (calcium), high pH, gypsum drilling fluids.
DynaLose W starch reduces filtration by first swelling and then blocking small openings in the filter cake. It will not significantly increase the rheological properties of the drilling fluid system in which it is used.
DynaLose W filtration control agent should be applied in an alkaline environment, which enhances its performance capabilities.
DynaLose W filtration control agent is used in concentrations of 2-6 lb/bbl, depending on the amount of drilled solids present in the drilling fluid system. Oxygen scavengers should be used to reduce thermal degradation. In the absence of high pH or high salinity, a bactericide should be used. DynaLose W powder mixes readily into the system through the hopper at rates of 5-10 minutes per sack, preventing balling and fish eyes. Starch is subject to bacterial degradation. When used in freshwater drilling fluids with a pH lower than 11.5, a bactericide is required. DynaLose W filtration control agent remains stable at bottomhole temperatures up to 250°F (121°C).
Tyical Physical Properties
Handling and Storage
DynaLose W powder is extremely slippery when wet. Minimize exposure to dust. Store in a cool, dry area away from ignition sources and strong oxidizing agents. Use appropriate hygiene, clothing and personal protective equipment suitable for work being done. Review the SDS thoroughly before using this product.
DynaLose W filtration control agent is available in 50-pound (22.7-kilogram) multi-walled bags.